Maestro M100 2G Bedienungsanleitung PDF herunterladen (Seite 51)

Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.

13.2. AT commands for configuring AI triggered AT command

13.2.1. AT+ADCAT command

This command is to enable/disable and configure AI triggered AT command function.

Command Syntax

AT+ADCAT=<action>(,<dir>,<Threshold>,<cmd> )

Response syntax:

+ADCAT: <action>,<dir>,<Threshold>,<cmd>

Command

Possible responses:

AT+ADCAT=0

Note : disable AI triggered AT command execution

AT+ADCAT =1

Note: enable I/O triggered AT command execution

AT+ ADCAT?

+IOAT : 1,1, 10,”AT+CMSS=5”

Note display current status

AT+ADCAT=2,1,10,”AT+IPR=115200”

Note: set the parameters < dir>, <Threshold>, <cmd>

low-to-high triggering, Threshold=1000 ms

command is “AT+IPR=115200”

AT+ ADCAT =?

+IOAT : (0-2),(0-1),(1-50),(128)

Note : possible argument

Defined Values:

0 disable AI triggered AT command execution

1 enable AI triggered AT command execution

2 configure AI triggered AT command parameters

<dir>

1 configure as low-to-high triggering

0 configure as high-to-low triggering

Time required for the detected state to trigger the AT command execution. Unit is in millisecond.

Valid value from 1 to 50 (0.1 sec to 5 sec). Refer to the above timing diagram in section 12.1

<cmd>

AT command to be executed when the AI port is triggered successfully. The length of the command is limited to 128

characters.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 86 87

Keine Kommentare

Maestro M100 2G Bedienungsanleitung Seite 51